Best Automatic Bilge Pump For 2024

A genuine Rule product, don't settle for anything less

More pumping capacity and more exclusive design features than any comparable competitive pump at a lower cost

1-1/8 inch (28. 6 millimeter) hose barb discharge outlet

Compact, efficient, long-life motors, able to run dry for short periods

Silent and vibrationless operation, stainless steel shaft, completely submersible, rust and corrosion resistant

3 Year Warranty

Included Components: Rule 02 Higher Capacity Bilge Pump - 1500 Gph, 5678 Lph, 12V

Material Type: Canvas

Sport Type: Boating

Reliably provides bilge water pumping for larger recreational boats

Meets automatic switch pump requirements for any vessels 20 feet and over with sleeping accommodations

High capacity for larger boats and yachts

Compact and durable package includes pump, wire seals, strainer, and mercury-free switch in one unit

Installs quickly and easily in tight spaces, mounts horizontally only

12-volt, 1.5-amp draw pump is rated for 1100 GPH performance at open flow (at voltage of 13.6 volts DC)

Comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a 1-1/8”-inch interior diameter hose

Flow Rate: 1100 GPH; Voltage: 12 VDC

Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia. 1-1/8" (29mm)

Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure

Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc

Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life

Bilge Pump 500

Power Rating: 12V

Quick and easy installation

Refer to manufacturer recommendations and guidelines to ensure a proper fit

Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring.

Equipped with built in electronic controlled reed sensor system for easy fully automatic operation

No power use until pump is activated by internal float switch (when water level rises)

Wire Lead(M): 1m; Outlet Diameter: 19mm/ 3/4"; Width: Approx. 81mm

Flow Rate (GPH): 750GPH; Volt: 12V; Current(A): 3A; Head(M): 3.0M

Built-in float switch! (No separate float switch is needed)

Automatic operation from the electro-magnetic float switch

Equipped with easy-to-install Dura-Port discharge ports

Ports eliminate stress cracking caused by overtightened hose clamps

Pumps include both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve

Flow Rate: 1000 GPH

What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily

Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts); Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m; The float switch's max amps 12 volts: 20 A; Max amps 24 volts: 10 A; Max Amps 32 volts: 8A; The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG

Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently; It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure

Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm); It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning

Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and most marine, RV, etc.; And it can also be applied in aquarium, small swimming pool, fountain and other places that need drain the water

Flow Rate: 900 GPH

13 VDC Power

Designed for tight spaces; Dimensions: 2.4" height

Pump only operates when water is present

Discharge body mounts horizontally or vertically and swivels up to 180°

OASIS MARINE 2 YEAR WARANTY

750 GPH 3/4 Inch Hose Outlet 20 amp 12volt Bilge Pump

Rugged water tight impact resistant housing Stainlessshaft Blocked Marine Boat wiring

All in one Bilge Pump & Float Switch No additional float switch required 3 wire can be used as auto with switch or both

Snap off strainer for easy cleaning

Superior Submersible Water Pump in boating accessories

Completely automatic with manual override; no float switch needed

Submersible and ignition protected

High efficiency, low amp motor

Stainless-steel shaft

Includes backflow preventer

Compact, automatic, fully submersible electric pump

Built-in float switch! (No separate float switch is needed)

Equipped with built in electronic controlled reed sensor system for easy fully automatic operation

No power use until pump is activated by internal float switch (when water level rises)

Compact, efficient, long life motor ; Rustproof and corrosion resistant; Stainless steel shaft; High-impact durable plastic housing

Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring.

Wire Lead(M): 1m; Outlet Diameter: 29mm/ 0.95 Inch (1-1/8"); Width: Approx. 81mm

Built-in float switch! (No separate float switch is needed)

Equipped with built in electronic controlled reed sensor system for easy fully automatic operation

No power use until pump is activated by internal float switch (when water level rises)

Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M

Compact, automatic, fully submersible electric pump

Built-in float switch! (No separate float switch is needed)

Equipped with built in electronic controlled reed sensor system for easy fully automatic operation

No power use until pump is activated by internal float switch (when water level rises)

Compact, efficient, long life motor ; Rustproof and corrosion resistant; Stainless steel shaft; High-impact durable plastic housing

Efficiently clears unwanted water from the bilges

Submersible with marine-grade tinned wires

Ignition and anti-airlock protection

Rated 2 amps at 12 volts

Fits 3/4 inch hose

Meets ABYC and USCG standards

Manufacturer part number 50-19341